Eurostat conductive magazines - PS
- Part number: 22-150-0943
Eurostat conductive magazines
The construction parameters are selected to minimize dimension tolerances
while using the magazine. The 4 outside walls are vacuum-formed from
3mm thick plastic sheets. Metal frame reinforcement on each opening.
Inner short walls are covered with a 1,2mm plastic sheet.
Reference plate and adjustable plate are thermoformed from 1,2mm thick
plastic sheet and reinforced with metal tubing.
Adjustment of the magazine to the PCB dimensions:
- Each magazine is equipped with a reference plate and an adjustable plate.
- Insertion of boards between the reference plate grooved at 10 mm pitch on one side and the
adjustable plate grooved at 10mm pitch on the both sides.
- The magazine is adjusted to the PCB dimensions by positioning the adjustable plate. For this
purpose the inner short walls are grooved at 5mm pitch. Each groove is numbered.
- The adjustable plate is asymmetric (2/3 - 1/3) allowing additional adjustment to a 2,5mm pitch.
Features
-
Conforms to
IEC 61340, RoHS compliant
-
Surface resistance
< 10^5 Ohm
-
Color
Black
-
Maximum temperature of use
60°
