ESD Rubber shelf mat
- Part number: 32-500-2402
ESD Rubber shelf mat
Rubber mat to cover shelving, benching and trolleys
Physical properties:
Material: Conductive carbon loaded rubber
Elongation: 200
Density: 1.4
Hardness: 55 Shore A (+/- 10%)
Tensile strength: 7,79
Usage temperature: -40° to +70° C
Thickness: 2.0mm (+/- 10%)
Colour: Black
Electrical properties:
Resistant to ground: <10e4Ω
Surface resistance: <10e4Ω
Compliant to: IEC 61340-5-1
In the same category
16 other products selected for you
Adesilex adhesive for GTI Tiles / Floor mats
Two-component, epoxy-polyurethane adhesive for resilient and textile flooring.
ESD Table mat Rolls - 100 cm x 10 m
Double layer table mat with a dissipative top-layer and a conductive bottom layer.
Sticky Mat - Pack 10
Stack of polyethylene sheets with adhesive on one side. People entering a cleanroom walk on it to remove contamination from shoes and wheels. Once a sheet is full, it is peeled off to reveal a...
ESD High temperature table mat - Precut 61 x 90 cm
ESD table mat high temperature resistant version, dissipative top layer
ESD vinyl table mat
Static dissipative vinyl table mat made of refined high elastic PVC
ESD Gerflor GTI EL5 Access Connect Tiles
ESD Flexible PVC slabs which provide excellent resistance to static and rolling loads.
Field service Kit & pouch
Protecting static sensitive devices and printed circuit boards from static damage
ESD High temperature table mat - Roll
ESD table mat high temperature resistant version, dissipative top layer
Gerflor GTI EL5 Connect ESD Tiles
ESD Flexible PVC slabs which provide excellent resistance to static and rolling loads.
Adhesive for Mipolam Floor
Special adhesive in water dispersion for PVC and rubber flooring in commercial project as well as a universal adhesive for all common floor covering types.
ESD Gerflor Mipolam Elegance Floor - Roll
Made out of dissipative vinyl material. Excellent grounding properties
