• Black conductive bags
Black conductive bags

Black conductive bags

  • Part number: 20-841-0305

Conductive bags

Conductive pockets made of black carbon-filled polyethylene.

Dimensions: from 76x127 mm to 965x1473 mm (+/- 5mm)

Thickness: 102µ

All dimensions are internal dimensions. The 1st dimension indicates the opening, the 2nd the height.

Sealing size: wire sealing

Marking: Standard with ESD requirements, approx. 50x50mm, yellow.

Lifetime: Permanent

The use of conductive pouches or sleeves can be damaging to electronic components due to the rapidity of surface discharges.

Features

  • Conforms to

    IEC 61340-5-1

  • Surface resistance

    < 10^5 Ohm

Technical documentation

In the same category

10 other products selected for you

Standard Pink PE bags - 50µ - without Zip

Heat-sealable ESD bags made from Pink low tribocharging LDPE

Standard Pink PE bags - 50µ - with Zip

Heat-sealable ESD bags made from Pink low tribocharging LDPE

Pink Bubble Bag

Offer an extra mechanical protection allowing to protect ESD non-sensitive materials in an EPA.

Standard Pink PE bags - 90µ - with Zip

Heat-sealable ESD bags made from Pink low tribocharging LDPE

Anticorrosive bags (VCI)

Anticorrosive and antistatic red LDPE bags

Standard Pink PE bags - 75µ - with Zip

Heat-sealable ESD bags made from Pink low tribocharging LDPE

PE Gusseted Shroud

Composed of 3 layers of pink PE, gusseted shrouds are ideal for the protection of pallets.

Standard Pink PE bags - 90µ - without Zip

Heat-sealable ESD bags made from Pink low tribocharging LDPE

Standard Pink PE bags - 75µ - without Zip

Heat-sealable ESD bags made from Pink low tribocharging LDPE

Permanent PE bags

Not shelf life. No greasy effect, stains, or contamination. Will not scratch in contact with sensitive parts