Straight cord
- Part number: 30-560-0148
Description
To connect mat to mat or mat to the ground
Product Specification
Material: Each cord contains 10 special conductive wires, the outer covered with a non-conductive polyurethane
Diameter: 2.4mm
Colour: Black
Resistance: 1 MΩ
Technical documentation
-
30-560-02xx, 01xx -
In the same category
6 other products selected for you
ESD Mat to Terminal Connection 2×10mm Male Studs 1MΩ Resistor – Eurostat
Eurostat ESD connection 2×10mm male studs for mat-to-terminal, mat-to-mat or to ground connection. 1MΩ resistor. For connecting mats to grounding point in EPA zones.
ESD 10mm Female Snap Fastener for Rigid Mat – Eurostat
Eurostat ESD 10mm female snap fastener for rigid table and floor mats up to 3mm. Grounding cord connection on rigid ESD mats in EPA zones.
ESD Adaptor 10mm Male/Female Stud to GSGS/Banana 4mm – Eurostat
Eurostat ESD adaptor: 10mm male stud one side, 10mm female stud other side, GSGS plug for 4mm banana. Grounding cord connection between different EPA connector types.
ESD Earth Bonding Plug Stud 10.3mm + 2.4m Coil Cord – Eurostat
Eurostat ESD earth bonding plug: 10.3mm stud + 2.4m coil cord, 1 MΩ resistor. Black ABS, Euro socket. Easy and cost-effective ESD grounding using the main earth.
ESD 10mm Male Snap Fastener for Rigid Mat – Eurostat
Eurostat ESD 10mm male snap fastener for rigid table and floor mats (up to 3mm thick). For grounding cord connection on rigid ESD mats in EPA zones.
Copper Strip for EPA Floor Grounding Gerflor GTI 200lm × 10mm – Eurostat
Eurostat copper strip 10mm × 200 linear metres: grounding of ESD floors in EPA zones. Specifically designed for Gerflor GTI Connect tile range. LM = linear metre.
