ESD Conductive Rubber Mat for Shelves and Trolleys – Eurostat
- Part number: 32-500-2402
ESD Conductive Rubber Mat for Shelves and Trolleys – Eurostat
The Eurostat ESD conductive carbon-loaded rubber mat is designed for covering shelving, benches and trolleys in EPA zones. Its temperature range -40°C to +70°C makes it suitable for demanding industrial environments.
Physical properties:
- ✓ Material: conductive carbon-loaded rubber
- ✓ Elongation: 200%
- ✓ Density: 1.4
- ✓ Hardness: 55 Shore A (±10%)
- ✓ Tensile strength: 7.79
- ✓ Usage temperature: -40°C to +70°C
- ✓ Thickness: 2.0mm (±10%)
- ✓ Colour: black
Electrical properties:
- ✓ Volume resistance
- ✓ For covering shelving, benches and trolleys in EPA zones
- ✓ IEC 61340-5-1 compliant
In the same category
16 other products selected for you
ESD Table Mat Roll 100cm × 10m – Eurostat
Eurostat ESD table mat roll 100cm × 10m: dissipative top + conductive bottom. Thickness 2.1mm, hardness 75 Shore A, abrasion resistance 160mm³. High temperature resistant. Easy to clean.
ESD Flexible PVC Tiles Gerflor GTI EL5 Connect for EPA
Gerflor GTI EL5 Connect ESD flexible PVC tiles: excellent resistance to static and rolling loads. Adhesive-free laying (loose-lay), stain-resistant surface treatment. Easy tile-by-tile repair.
Gerflor Mipolam Elegance ESD Dissipative Vinyl Floor Roll for EPA
Eurostat Gerflor Mipolam Elegance ESD floor: dissipative vinyl, excellent grounding properties, easy to clean, traffic and chemical resistant. Multiple colours. For EPA zones.
Cleanroom Decontamination Sticky Mats – Pack of 10 – Eurostat
Eurostat cleanroom sticky mats: stack of adhesive polyethylene sheets that remove residual contamination from shoe soles and wheels at the entrance of cleanrooms and clean zones. 30 sheets per...
ESD Bubble Anti-Fatigue Mat PU Foam 14mm – Eurostat
Eurostat ESD bubble anti-fatigue mat: 14mm ESD PU foam, Rs 10⁵–10⁷ Ω, resistance to ground 10⁵–10⁷ Ω. 5.5 kg/m². Bubble design. Black. IEC EN 61340-5-1 compliant.
ESD High temperature table mat - Precut
ESD table mat high temperature resistant version, dissipative top layer
ESD EVA Mat for Shelves and Trolleys 0.5m × 24m – Eurostat
Eurostat ESD EVA mat: 0.5m × 24m × 1.5mm. Cost-effective solution to cover shelving, benches and trolleys in EPA zones. Delivered without accessories.
ESD Portable Field Service Kit with Case – Eurostat
Eurostat ESD field service kit with case: protects ESD-sensitive PCBs and components during on-site maintenance. Reduces maintenance costs and improves equipment reliability.
High Temperature ESD Table Mat Precut 61×90cm – Eurostat
Eurostat high temperature ESD table mat precut 61×90cm: dissipative top layer + conductive bottom layer. Soldering heat resistant. Supplied with 2×10mm studs and grounding cord ref. 30-560-1510.
High Temperature ESD Table Mat Roll 1.22×10m – Eurostat
Eurostat high temperature ESD table mat roll 1.22×10m: dissipative top layer + conductive bottom layer. Soldering heat resistant. Pre-cut sizes available on request.
ESD Dissipative Vinyl Table Mat High Elastic PVC – Eurostat
Eurostat ESD dissipative vinyl table mat in refined high elastic PVC: oil, water and chemical resistant. Smooth easy-clean surface, dimensionally stable. For EPA zones.
ESD Floor Mat Roll Hardness 85 Shore A – Eurostat
Eurostat ESD floor mat roll: abrasion ≤200mm³ (ISO 4649), hardness 85±5 Shore A, indentation ≤0.25mm. Adhesive floor laying recommended. Joint every 1.5m. Grounding every 30m².
ESD Anti-Fatigue Mat Black and Yellow Ramped Edges – Eurostat
Eurostat ESD anti-fatigue mat black and yellow: non-slip bubble surface, ramped safety edges all sides, highly visible yellow border. Standing EPA workstations.
Ultrabond Acrylic Water-Based Adhesive for Gerflor Mipolam ESD Floor – Eurostat
Eurostat Ultrabond solvent-free water-based acrylic adhesive: for Gerflor Mipolam ESD flexible flooring. Compatible with non-absorbent substrates. Do not use on damp surfaces.
