ESD Conductive Rubber Mat for Shelves and Trolleys – Eurostat
- Part number: 32-500-2402
ESD Conductive Rubber Mat for Shelves and Trolleys – Eurostat
The Eurostat ESD conductive carbon-loaded rubber mat is designed for covering shelving, benches and trolleys in EPA zones. Its temperature range -40°C to +70°C makes it suitable for demanding industrial environments.
Physical properties:
- ✓ Material: conductive carbon-loaded rubber
- ✓ Elongation: 200%
- ✓ Density: 1.4
- ✓ Hardness: 55 Shore A (±10%)
- ✓ Tensile strength: 7.79
- ✓ Usage temperature: -40°C to +70°C
- ✓ Thickness: 2.0mm (±10%)
- ✓ Colour: black
Electrical properties:
- ✓ Volume resistance
- ✓ For covering shelving, benches and trolleys in EPA zones
- ✓ IEC 61340-5-1 compliant
In the same category
16 other products selected for you
ESD Floor Mat Roll Hardness 85 Shore A – Eurostat
Eurostat ESD floor mat roll: abrasion ≤200mm³ (ISO 4649), hardness 85±5 Shore A, indentation ≤0.25mm. Adhesive floor laying recommended. Joint every 1.5m. Grounding every 30m².
ESD Table Mat Roll 100cm × 10m – Eurostat
Eurostat ESD table mat roll 100cm × 10m: dissipative top + conductive bottom. Thickness 2.1mm, hardness 75 Shore A, abrasion resistance 160mm³. High temperature resistant. Easy to clean.
ESD Anti-Fatigue Mat Diamond Embossed Surface 16mm – Eurostat
Eurostat ESD anti-fatigue mat diamond embossed surface 16mm: 910×1520mm standard, ramped safety edges, rounded corners, integrated 10mm female stud. For use with ESD shoes.
ESD Table Mat Roll 122cm × 10m – Eurostat
Eurostat ESD table mat roll 122cm × 10m: dissipative top + conductive bottom. Thickness 2.1mm, hardness 75 Shore A. High temperature resistant. Easy to clean. Large format.
Cleanroom Decontamination Sticky Mat – Pack of 10 – Eurostat
Eurostat Sticky Mat pack of 10: 30µm adhesive PE sheets, adhesion 180g/25mm. Removes contamination from shoes and wheels at cleanroom entry. Sheet-by-sheet peeling.
Adesilex Two-Component Epoxy-Polyurethane Adhesive for GTI Tiles and ESD Floor Mats – Eurostat
Eurostat Adesilex two-component epoxy-polyurethane adhesive: high performance, elastic, non-absorbent substrates. For GTI tiles (>400/500m²) and ESD floor mats. Heavy traffic resistant.
High Temperature ESD Table Mat Roll 1.22×10m – Eurostat
Eurostat high temperature ESD table mat roll 1.22×10m: dissipative top layer + conductive bottom layer. Soldering heat resistant. Pre-cut sizes available on request.
Gerflor GTI EL5 Access Connect ESD Tiles for EPA Zone
Gerflor GTI EL5 Access Connect ESD tiles: flexible PVC, adhesive-free loose-lay, stain-resistant surface treatment, easy replacement. Excellent resistance to static and rolling loads.
ESD Portable Field Service Kit with Case – Eurostat
Eurostat ESD field service kit with case: protects ESD-sensitive PCBs and components during on-site maintenance. Reduces maintenance costs and improves equipment reliability.
Gerflor Mipolam Elegance ESD Dissipative Vinyl Floor Roll for EPA
Eurostat Gerflor Mipolam Elegance ESD floor: dissipative vinyl, excellent grounding properties, easy to clean, traffic and chemical resistant. Multiple colours. For EPA zones.
Ultrabond Acrylic Water-Based Adhesive for Gerflor Mipolam ESD Floor – Eurostat
Eurostat Ultrabond solvent-free water-based acrylic adhesive: for Gerflor Mipolam ESD flexible flooring. Compatible with non-absorbent substrates. Do not use on damp surfaces.
ESD Bubble Anti-Fatigue Mat PU Foam 14mm – Eurostat
Eurostat ESD bubble anti-fatigue mat: 14mm ESD PU foam, Rs 10⁵–10⁷ Ω, resistance to ground 10⁵–10⁷ Ω. 5.5 kg/m². Bubble design. Black. IEC EN 61340-5-1 compliant.
ESD Anti-Fatigue Mat Black and Yellow Ramped Edges – Eurostat
Eurostat ESD anti-fatigue mat black and yellow: non-slip bubble surface, ramped safety edges all sides, highly visible yellow border. Standing EPA workstations.
High Temperature ESD Table Mat Precut 61×90cm – Eurostat
Eurostat high temperature ESD table mat precut 61×90cm: dissipative top layer + conductive bottom layer. Soldering heat resistant. Supplied with 2×10mm studs and grounding cord ref. 30-560-1510.
Gerflor GTI EL5 Corner Connect ESD Flexible PVC Tiles for EPA Zone
Gerflor GTI EL5 Corner Connect ESD flexible PVC tiles: excellent resistance to static and rolling loads, stain-resistant treatment, adhesive-free loose-lay, easy replacement. High electrical...
ESD EVA Mat for Shelves and Trolleys 0.5m × 24m – Eurostat
Eurostat ESD EVA mat: 0.5m × 24m × 1.5mm. Cost-effective solution to cover shelving, benches and trolleys in EPA zones. Delivered without accessories.
