ESD Wera 1569 NUT Nut Driver Micro Rs ≤ 10⁵ Ω IEC 61340-2-3
- Part number: 45-070-0043
ESD Wera 1569 NUT Screwdriver – Eurostat
The ESD Wera 1569 NUT is a high quality micro nut driver for safe nut driving on sensitive electronic components in EPA zones.
- ✓ Head: NUT (nut driver)
- ✓ Surface resistance: < 1 × 10⁵ Ω
- ✓ Application standards: IEC 61340-2-3
- ✓ REACH-compliant
- ✓ ESD-safe micro nut driver
- ✓ Rapid twisting from fixing hand on head
- ✓ Dependable protection against electrostatic energy
- ✓ High quality Wera
- ✓ Brand: Wera
Technical documentation
-
45-070-0043-0053_EN.pdf -
In the same category
16 other products selected for you
ESD Wera 1567 TX BO Torx Open End Micro Screwdriver Rs ≤ 10⁵ Ω IEC 61340-2-3
ESD Wera 1567 TX BO Torx open end (BO) micro screwdriver: Rs <10⁵ Ω, IEC 61340-2-3, REACH. Open end allows screwing on long-shank bolts. High quality Wera.
ESD Wera 816R Bit Holder + 16 Bits 1/4" Rs ≤ 10⁹ Ω IEC 61340-2-3
ESD Wera bits set 2: 2×816R holders + 16 bits 1/4". Rs <10⁹ Ω, IEC 61340-2-3, REACH. High working speeds. Multi-component ergonomic. Wera.
ESD Knipex Cutting Pliers 77 42 115 – Pointed Head without Bevel Mirror Polished 70g
ESD Knipex 77 42 115 cutting pliers: pointed head without bevel, mirror polished. Rs <10⁵ Ω. 70g, 115×66×17mm. Medium hard Ø 0.8mm / soft Ø 1.3mm.
ESD Knipex 92 89 02 Replaceable Carbon Fibre Reinforced Tips High Performance 40×8×3.5mm
ESD Knipex 92 89 02 high-performance carbon fibre reinforced plastic tips: Rs <10⁴ Ω, 40×8×3.5mm. Replacement tips for Knipex tweezers ref. 45-060-0028. IEC 61340. REACH.
ESD Knipex Cutting Pliers 77 32 115 – Pointed Head Small Bevel Mirror Polished 70g
ESD Knipex 77 32 115 cutting pliers: pointed head small bevel, mirror polished. Rs <10⁵ Ω. 70g, 115×67×17mm. Medium hard Ø 1.0mm / hard Ø 0.5mm / soft Ø 1.3mm.
ESD Knipex Cutting Pliers 77 52 115 – Pointed Head Small Bevel Mirror Polished 65g
ESD Knipex 77 52 115 cutting pliers: pointed head small bevel, mirror polished. Rs <10⁵ Ω. 65g, 115×66×17mm. Medium hard Ø 0.8mm / hard Ø 0.5mm / soft Ø 1.0mm.
ESD Knipex Cutting Pliers 77 12 115 – Round Head Bevel + Lead Catcher Mirror Polished
ESD Knipex 77 12 115 cutting pliers: round head with bevel + lead catcher, mirror polished. Rs <10⁵ Ω. 70g, 115×69×17mm. Medium hard Ø 1.2mm / hard Ø 0.6mm / soft Ø 1.6mm.
ESD Knipex 5-Piece Stainless Steel Tweezers Set Rs ≤ 10⁴ Ω with 7-Compartment Tool Roll
ESD Knipex 5-piece stainless steel tweezers set: high performance, Rs <10⁴ Ω, IEC 61340, REACH. Supplied with 7-compartment tool roll (non-ESD). For safe handling of sensitive components.
ESD Wera 7455/56 TORQUE 4mm Factory Preset Torque Rs ≤ 10⁵ Ω IEC 61340-2-3
ESD Wera 7455/56 TORQUE 4mm: customized factory preset torque, 4mm bits, high precision. Rs <10⁵ Ω, IEC 61340-2-3, REACH. Audible click on overload. Wera.
ESD Polyurethane Foam Micro-Swab – Eurostat
Eurostat ESD micro-swab: microporous polyurethane foam head mechanically attached without adhesive to polypropylene stick. Ultra-soft, ultra-low particle generation. Cleanroom and EPA compatible.
ESD Knipex Cutting Pliers 78 61 140 – Oblique Very Sharp without Bevel Burnished 85g
ESD Knipex 78 61 140 cutting pliers: oblique, ground very sharp edges, without bevel, burnished. Rs <10⁵ Ω. 85g, 140×70×13mm. Medium hard Ø 1.4mm / soft Ø 0.2–2.1mm.
ESD Knipex Pliers 35 12 115 – Flat Wide Jaws Mirror Polished 70g
ESD Knipex pliers 35 12 115: flat wide jaws, mirror polished head. Rs <10⁵ Ω, DIN ISO 9655 & DIN EN 61340-5. REACH. 70g, 115×68×17mm. For sensitive components.
ESD Knipex Cutting Pliers 78 71 125 – Narrow Head with Lead Catcher
ESD Knipex 78 71 125 cutting pliers: narrow head + lead catcher, burnished. Rs <10⁵ Ω, IEC 61340, REACH. 125mm, 55g. Soft wire capacity Ø 0.2–1mm. Sensitive components.
ESD Wera 813R Kraftform Micro 4mm Non-Magnetic Short Bit Holder Rs ≤ 10⁹ Ω
ESD Wera 813R Kraftform Micro short 4mm non-magnetic bit holder: Rs <10⁹ Ω, IEC 61340-2-3, REACH. Short version for tight areas. Non-magnetic. Kraftform handle. Wera.
ESD Wera Screwdriver Set Rs ≤ 10⁵ Ω Stainless Steel IEC 61340-2-3
ESD Wera screwdriver set: stainless steel, Rs <10⁵ Ω, IEC 61340-2-3 compliant, REACH. Reliable ESD protection when fastening on sensitive electronic components.
ESD Wera Stubby Compact Bit Holder with Bits Set Rs ≤ 10⁵ Ω IEC 61340-2-3
ESD Wera stubby compact bit holder with bits set: Rs <10⁵ Ω, IEC 61340-2-3, REACH. Lightning fast blade replacement. Compact handle for tight areas. Wera.
