ESD Adaptor 10mm Male/Female Stud to GSGS/Banana 4mm – Eurostat
- Part number: 30-552-6011
ESD Multi-Connector Adaptor – Eurostat
The Eurostat ESD adaptor enables interconnection between different connector types found on EPA workstations. Its 10mm male stud / 10mm female stud / GSGS for 4mm banana configuration covers most grounding configurations encountered in EPA zones.
- ✓ 10mm male pressure button on one side
- ✓ 10mm female pressure button on the other side
- ✓ GSGS plug at the end for 4mm banana plug
- ✓ For interconnection between different EPA connector types
- ✓ Grounding cord connection to grounding device
- ✓ IEC 61340-5-1 compliant
In the same category
5 other products selected for you
ESD Mat to Terminal Connection 2×10mm Male Studs 1MΩ Resistor – Eurostat
Eurostat ESD connection 2×10mm male studs for mat-to-terminal, mat-to-mat or to ground connection. 1MΩ resistor. For connecting mats to grounding point in EPA zones.
ESD 10mm Male Snap Fastener for Rigid Mat – Eurostat
Eurostat ESD 10mm male snap fastener for rigid table and floor mats (up to 3mm thick). For grounding cord connection on rigid ESD mats in EPA zones.
ESD Earth Bonding Plug Stud 10.3mm + 2.4m Coil Cord – Eurostat
Eurostat ESD earth bonding plug: 10.3mm stud + 2.4m coil cord, 1 MΩ resistor. Black ABS, Euro socket. Easy and cost-effective ESD grounding using the main earth.
ESD 10mm Female Snap Fastener for Rigid Mat – Eurostat
Eurostat ESD 10mm female snap fastener for rigid table and floor mats up to 3mm. Grounding cord connection on rigid ESD mats in EPA zones.
Copper Strip for EPA Floor Grounding Gerflor GTI 200lm × 10mm – Eurostat
Eurostat copper strip 10mm × 200 linear metres: grounding of ESD floors in EPA zones. Specifically designed for Gerflor GTI Connect tile range. LM = linear metre.
