ESD Grounding Cord 3m, 10mm Female Stud with...
ESD Grounding Cord 3m, 10mm Female Stud with GSGS Socket and Eyelet - Eurostat

ESD Grounding Cord 3m, 10mm Female Stud with GSGS Socket and Eyelet - Eurostat

30-560-0148

3m ESD grounding cord: 10mm female stud with GSGS socket on the mat side, eyelet terminal on the ground side, built-in 1 MΩ resistor. Grounds both the mat and the operator's wrist strap from a single point.

 

3m ESD Grounding Cord with GSGS Socket - Eurostat

This Eurostat cord connects an ESD mat to the workstation ground point and also acts as the connection point for the operator's wrist strap. The 10mm female stud snaps onto the mat stud, and its housing includes a GSGS socket into which the wrist strap cord plugs directly. The other end, fitted with an eyelet terminal, attaches to the ground terminal. A single cord therefore grounds both the mat and the operator, simplifying station wiring and reducing the number of connections to check. The built-in 1 MΩ resistor limits current in the event of accidental contact with a voltage source. The cable, made of 10 conductive wires in an insulating polyurethane sheath, stands up to daily handling.

  • ✓ Length: 3m
  • ✓ Mat side: 10mm female stud with GSGS socket for wrist strap cord
  • ✓ Ground side: eyelet terminal
  • ✓ Built-in resistor: 1 MΩ
  • ✓ Cable: 10 conductive wires, insulating polyurethane sheath
  • ✓ Cable diameter: 2.4mm
  • ✓ Colour: black
  • ✓ Grounds mat and wrist strap with one cord
  • ✓ Compatible wrist strap cord: GSGS plug coil cord ref. 30-560-0614